|
|
Post by Kingsley on Feb 19, 2004 8:18:15 GMT -5
The fuel rail and injectors are maintained from the plenum set up. i'd imagine a 4 injector system would be needed to ensure all cylenders had an even amount of nos
|
|
|
|
Post by Rob Bell on Feb 19, 2004 9:06:15 GMT -5
Hmm - given that you've got full control over the fuel map Kingsley with your Emerald ECU, you could be right that you could get away with just the NOS 'injectors' (one for each throttle body).
Does the Emerald have the facility to have an input to alter the fueling according to a button-switch (ie the switch you'd use to initiate the NOS injection)? Dave Walker would certainly know the answer to that one! Might be worth a chat...
|
|
|
|
Post by Kingsley on Feb 19, 2004 9:36:23 GMT -5
Emerald is already maxing out on the fuel injectors at the top end of the map, so there's no real potental for more fuel from the emerald without putting a higher fuel pressure regulator first. i imagine the emerald could do a progressive nos map so more was added the more throttle you had on, thus the power would increace exponentialy to the red line.
interesting
|
|
|
|
Post by ScarletFever on Feb 23, 2004 6:14:01 GMT -5
|
|
|
|
Post by Rob Bell on Feb 23, 2004 9:01:02 GMT -5
Great pix. Have you got an estimated time frame for fitting this kit Andy?  |
|
|
|
Post by ScarletFever on Feb 23, 2004 9:20:54 GMT -5
Not yet, to be honest i'm in no real rush to do it - i bought it 'on a whim' at Stoneliegh (the price was right and i couldn't say no!) There are still some things i'm not 100% happy with though. /me Lack of instructions /me No pressure guage on the bottle /me No bottle clamps for mounting the bottle Instructions are supposed to be on thier website, but i have yet to find them. Going to put a call into Newport NOS systems this afternoon and see what i can find out. Other issues to be resolved include the priming switch (i understand Cannonball Bob won't be back from Basrah for at least another month) and the location/mounting of the bottle, although i did have an idea about this. The fitted luggage i have for Scarlet fills the boot entirely and this is the reason for me looking to site it somewhere else. Did i say entirely? Well, not quite you see there is a horizontal gap by the boot latch where the bottle might just fit... |
|
|
|
Post by Rob Bell on Feb 23, 2004 12:14:57 GMT -5
Front bulhead option out then Andy? Pitty about the lack of instructions!  |
|
|
|
Post by ScarletFever on Feb 26, 2004 5:14:15 GMT -5
Got an Email fron Newport NOS Systems last night with a .rtf attachement - i'm hoping these are the instructions. Will open the document later on today (fingers crossed). Hey! A new smiley!  |
|
|
|
Post by Rob Bell on Feb 26, 2004 6:16:28 GMT -5
Got an Email fron Newport NOS Systems last night with a .rtf attachement - i'm hoping these are the instructions. Will open the document later on today (fingers crossed). Hey! A new smiley! Finger's crossed Andy! Regarding the smiley - yeah, I didn't like the original one and we didn't have a good LOL symbol. But I do need to change it's colour though - wrong shade of yellow! LOL |
|
|
|
Post by ScarletFever on Feb 26, 2004 8:37:00 GMT -5
For NOS stuff, go to the SSZ. I have some great smileys if you want them mate, been collecting them for a while now! |
|
